Ironing Board Covers 125 x 45 cm

Who does a 125 x 45 cm cover suit?

A 125 × 45 cm cover suits ironing boards that are about 125 cm long and 45 cm across at their widest point. This is the standard full-size UK board size the ROBINAZ cover is listed for, and the larger of its two sizes.

If your board is narrower, around 38 cm wide, read the 122 x 38 cm cover page. The same ROBINAZ cover is listed for both sizes, so you only need to check that your board matches one of them.

How do I measure my board for a 125 x 45 cm cover?

Lay the board flat and use a soft tape measure. Measure the length from the pointed nose to the flat end, then the width across the widest point. A board of about 125 cm by 45 cm matches this size.

Take the old cover off first, because a worn cover can stretch and give a misleading width. Measure the widest span on curved edges. For a full walkthrough, see how to measure your ironing board for a cover, and compare both sizes in the size guide.

What is the cover made of?

The ROBINAZ cover is built from four layers: a 100% cotton top with no chemical coating, felt, foam and a non-slip backing. This gives roughly 6–7 mm of padding across the full surface of the board.

It stays in place with a nose pocket, an elasticated edge with drawcord and two adjustable underboard straps. Read the full ROBINAZ ironing board cover details, or our guide ironing board cover and padding on whether you need separate padding.

How do I fit the cover?

Lay the cover face down, place the board on top with its legs folded, and pull the elasticated edge around the board. Then tighten the drawcord and the two underboard straps until the cover sits flat with no wrinkles.

Start by slipping the nose pocket over the pointed end of the board, so the cover is anchored before you stretch it towards the flat end. Work the elastic evenly down both sides rather than pulling one side at a time.

Check the surface once it is on. Creases in the cover can mark a garment, so smooth out any ripples and re-tighten the drawcord after your first ironing session, as the layers settle.

How do I wash the cover?

Machine wash the cover at 30°C on a gentle cycle and let it air dry. Do not tumble dry, as heat can shrink the padding and distort the elasticated edge. Refit it on the board once it is completely dry.

Full step-by-step advice is in our guide on how to wash and care for an ironing board cover.

Which size if my board is 122 x 45 cm?

We do not list 122 × 45 cm as a size, so we cannot promise the ROBINAZ cover fits it. Measure your board again from the pointed nose to the flat end and across the widest point, then compare the result with our size guide before you order.

If your measurements turn out to be 125 × 45 cm or 122 × 38 cm, the cover is listed for your board. If they are still 122 × 45 cm, or you are unsure, contact us with your measurements before buying.